Aluminum blackening set Ballistol 6 pcs. 23936

Aluminium burnishing set with aluminium burnishing for surface refinement, for new burnishing and restoration of minor damage incl. aluminium primer for preparation for burnishing.

Application tip: The black oxidiser is very easy to use. The only thing to remember is to degrease surfaces before burnishing. Ballistol Cold Degreaser, Ballistol Gun Parts Cleaner or Ballistol Brake and Parts Cleaner are suitable for this purpose. If necessary, the surface can also be lightly sanded. Apply the black finish evenly and leave to work for 20-30 seconds. Then dab dry and apply again. After 3-4 repetitions, rinse with water and finally preserve.

Important: Do not use at temperatures below 20°C.

The burnish is very economical. Approximately 100 ml is required for one square metre.

For safe and proper application, please follow the user manual. Aluminium and aluminium alloys are available in many different compositions. The burnishing can therefore achieve different results. You can also find an overview of the effects that aluminium burnishing can achieve in the instructions for use.

Contents:

• Aluminium primer, 50 ml;
• Aluminium burnishing, 50 ml;
• Gunex special gun oil, spray 50 ml;
• 2 pairs of disposable nitrile gloves;
• 2 goat hair brushes;
• 2 absorbent cleaning cloths.